Windows Passwords Hack
This hack will show you how to reset Windows administrator password (for Win 2000, XP, Vista and Win 7) at times when you forget it or when you want to gain access to a computer for which you do not know the password.
Most of us have experienced a situation where in we need to gain access to a computer which is password protected or at times we may forget the administrator password without which it becomes impossible to login to the computer. So here is an excellent hack using which you can reset the password or make the password empty (remove the password) so that you can gain administrator access to the computer. You can do this with a small tool called Offline NT Password & Registry Editor. This utility works offline, that means you need to shut down your computer and boot off your using a floppy disk, CD or USB device (such as pen drive). The tool has the following features.
- You do not need to know the old password to set a new one
- Will detect and offer to unlock locked or disabled out user accounts!
- There is also a registry editor and other registry utilities that works under linux/unix, and can be used for other things than password editing.
How it works?
Most Windows operating systems stores the login passwords and other encrypted passwords in a file called sam(Security Accounts Manager). This file can be usually found in \windows\system32\config. This file is a part of Windows registry and remains inaccessible as long as the OS is active. Hence it is necessary that you need to boot off your computer and access this sam file via boot. This tool intelligently gains access to this file and will reset/remove the password associated with administrator or any other account.
The download link for both CD and floppy drives along with the complete instructions is given below
It is recommended that you download the CD version of the tool since floppy drive is outdated and doesn’t exist in today’s computer. Once you download you’ll get a bootable image which you need to burn it onto your CD. Now boot your computer from this CD and follow the screen instructions to reset the password.
Another simple way to reset non-administrator account passwords
Here is another simple way through which you can reset the password of any non-administrator accounts. The only requirement for this is that you need to have administrator privileges. Here is a step-by-step instruction to accomplish this task.
1. Open the command prompt (Start->Run->type cmd->Enter)
2. Now type net user and hit Enter
3. Now the system will show you a list of user accounts on the computer. Say for example you need to reset the password of the account by name John, then do as follows
4. Type net user John * and hit Enter. Now the system will ask you to enter the new password for the account. That’s it. Now you’ve successfully reset the password for John without knowing his old password.
So in this way you can reset the password of any Windows account at times when you forget it so that you need not re-install your OS for any reason. I hope this helps.
Password Hacking FAQ
1. What are some password basics?
Most accounts on a computer system usually have some method of restricting access to that account, usually in the form of a password. When accessing the system, the user has to present a valid ID to use the system, followed by a password to use the account. Most systems either do not echo the password back on the screen as it is typed, or they print an asterisk in place of the real character.
On most systems,the password is typically ran through some type of algorithm to generate a hash. The hash is usually more than just a scrambled version of the original text that made up the password, it is usually a one-way hash. The one-way hash is a string of characters that cannot be reversed into its original text. You see, most systems do not “decrypt” the stored password during authentication, they store the one-way hash. During the login process, you supply an account and password. The password is ran through an algorithm that generates a one-way hash. This hash is compared to the hash stored on the system. If they are the same, it is assumed the proper password was supplied.
Cryptographically speaking, some algorithms are better than others at generating a one-way hash. The main operating systems we are covering here — NT, Netware, and Unix — all use an algorithm that has been made publically available and has been scrutinized to some degree.
To crack a password requires getting a copy of the one-way hash stored on the server, and then using the algorithm generate your own hash until you get a match. When you get a match, whatever word you used to generate your hash will allow you to log into that system. Since this can be rather time-consuming, automation is typically used. There are freeware password crackers available for NT, Netware, and Unix.
2. Why protect the hashes?
If the one-way hashes are not the password itself but a mathematical derivative, why should they be protected? Well, since the algorithm is already known, a password cracker could be used to simply encrypt the possible passwords and compare the one-way hashes until you get a match. There are two types of approaches to this — dictionary and brute force.
Usually the hashes are stored in a part of the system that has extra security to limit access from potential crackers.
Usually the hashes are stored in a part of the system that has extra security to limit access from potential crackers.
3. What is a dictionary password cracker?
A dictionary password cracker simply takes a list of dictionary words, and one at a time encrypts them to see if they encrypt to the one way hash from the system. If the hashes are equal, the password is considered cracked, and the word tried from the dictionary list is the password.
Some of these dictionary crackers can “manipulate” each word in the wordlist by using filters. These rules/filters allow you to change “idiot” to “1d10t” and other advanced variations to get the most from a word list. The best known of these mutation filters are the rules that come with Crack (for Unix). These filtering rules are so popular they have been ported over to cracking software for NT.
If your dictionary cracker does not have manipulation rules, you can “pre-treat” the wordlist. There are plenty of wordlist manipulation tools that allow all kinds of ways to filter, expand, and alter wordlists. With a little careful planning, you can turn a small collection of wordlists into a very large and thorough list for dictionary crackers without those fancy word manipulations built in.
4. What is a brute force password cracker?
A brute force cracker simply tries all possible passwords until it gets the password. From a cracker perspective, this is usually very time consuming. However, given enough time and CPU power, the password eventually gets cracked.
Most modern brute force crackers allow a number of options to be specified, such as maximum password length or characters to brute force with.
5. Which method is best for cracking?
It really depends on your goal, the cracking software you have, and the operating system you are trying to crack. Let’s go through several scenarios.
If you remotely retrieved the password file through some system bug, your goal may be to simply get logged into that system. With the password file, you now have the user accounts and the hashes. A dictionary attack seems like the quickest method, as you may simply want access to the box. This is typical if you have a method of leveraging basic access to gain god status.
If you already have basic access and used this access to get the password file, maybe you have a particular account you wish to crack. While a couple of swipes with a dictionary cracker might help, brute force may be the way to go.
If your cracking software does both dictionary and brute force, and both are quite slow, you may just wish to kick off a brute force attack and then go about your day. By all means, we recommend a dictionary attack with a pre-treated wordlist first, followed up by brute force only on the accounts you really want the password to.
You should pre-treat your wordlists if the machine you are going to be cracking from bottlenecks more at the CPU than at the disk controller. For example, some slower computers with extremely fast drives make good candidates for large pre-treated wordlists, but if you have the CPU cycles to spare you might want to let the cracking program’s manipulation filters do their thing.
A lot of serious hackers have a large wordlist in both regular and pre-treated form to accommodate either need.
6. What is a salt?
To increase the overhead in cracking passwords, some algorithms employ salts to add further complexity and difficulty to the cracking of passwords. These salts are typically 2 to 8 bytes in length, and algorithmically introduced to further obfuscate the one-way hash. Of the major operating systems covered here, only NT does not use a salt. The specifics for salts for both Unix and Netware systems are covered in their individual password sections.
Historically, the way cracking has been done is to take a potential password, encrypt it and produce the hash, and then compare the result to each account in the password file. By adding a salt, you force the cracker to have to read the salt in and encrypt the potential password with each salt present in the password file. This increases the amount of time to break all of the passwords, although it is certainly no guarantee that the passwords can’t be cracked. Because of this most modern password crackers when dealing with salts do give the option of checking a specific account.
7. What are the dangers of cracking passwords?
The dangers are quite simple, and quite real. If you are caught with a password file you do not have legitimate access to, you are technically in possession of stolen property in the eyes of the law. For this reason, some hackers like to run the cracking on someone else’s systems, thereby limiting their liability. I would only recommend doing this on a system you have a legitimate or well-established account on if you wish to keep a good eye on things, but perhaps have a way of running the cracking software under a different account than your own. This way, if the cracking is discovered (as it often is — cracking is fairly CPU-intensive), it looks to belong to someone else. Obviously, you would want to run this under system adminstrator priviledges as you may have a bit more control, such as assigning lower priority to the cracking software, and hiding the results (making it less obvious to the real administrator).
Being on a system you have legit access to also allows you better access to check on the progress. Of course, if it is known you are a hacker, you’ll still be the first to be blamed whether the cracking software is yours or not!
Running the cracking software in the privacy of your own home has the advantage of allowing you to throw any and all computing power you have at your disposal at a password, but if caught (say you get raided) then there is little doubt whose cracking job is running. However, there are a couple of things you can do to protect yourself: encrypt your files. Only decrypt them when you are viewing them, and wipe and/or encrypt them back after you are done viewing them.
8. Is there any way I can open a password-protected Microsoft Office document?
Comments
Post a Comment